Specialist Torque Products


Warning: A non-numeric value encountered in /home/customer/www/gedoreuk.com/public_html/wp-content/themes/Gedore/woocommerce/single-product.php on line 92
422

8460 Z — 8471 Z Torque wrench DREMOMETER Z with quick-fitting change 8–1000 N·m / 70 lbf·in — 730 lbf·ft

£422.00

About this product

  • Classified according to DIN EN ISO 6789-2:2017 Type II Class A, incl. traceable test certificate, calibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard
  • Lightweight yet robust (as the housing is made of an aluminium alloy) and resilient, very workshop-friendly
  • Depending on the application, access is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket).
  • Force to be applied in the middle of the handgrip only - do not use an extension tube as otherwise, inaccuracies can evolve (except for model DXZ where the DREMOMETER has been calibrated and adjusted using the extension tube)
  • Operation only with end fittings with standardised depth gauges, otherwise inaccuracies can arise. Keep the depth gauges on the certificate in mind. Only use original GEDORE accessories.
  • Large drive cross-section transfers maximum torques
  • Extremely low wear attributable to reduced forces in a lever mechanism
  • Forged lever chain from our group own quality forge
  • Maximum precision even when subjected to extreme continuous use
  • Long life cycles and tool lives
  • Easy operation - fast and safe torque tightening
  • Easy adjustment thanks to attractive adjusting button secured against loss at the end of the handle
  • With certificate acc. to DIN EN ISO 6789-2:2017, traceable via in-house DAkkS laboratory to national standards

Information

  • Contents (Qty of pieces): 1 tlg.
  • Drive size [mm]: 16 mm
  • Torque range (min./max.): -
  • Torque range (min./max.): -
  • Total width [mm]: 35 mm
  • Total height [mm]: 30 mm
  • Material: Aluminum alloy
  • Head height 1 [mm]: 30 mm
  • Width of head 1 [mm]: 35,0 mm
  • Drive type/drive: Drive pin
  • REACH registration available: 0
  • Storage/Content: Plastic box
  • Trigger mechanism: Short path triggering
  • Precision +/-: +/- 3 %
  • Tightening direction: Left and right
  • Fixed setting: 0
  • Test certificate: DIN EN ISO 6789-2:2017
  • Target groups: Automotive Industry Construction and commercial vehicles Military Energy Mechanical engineering Workshop Utilities Service Railway Agriculture Oil & Gas Utilities
  • Range of application: Assembly Series assembly Production Maintenance and repair
  • :
  • :
  • :
  • :
  • :
  • :
  • :
  • :
  • :
  • :
  • :
  • :
  • :
  • :
  • :
  • :
  • :
  • :
  • :
  • :
  • :

Specification

Weight (kg):

Length (cm):

Width (cm):

Height (cm):