7460 Z — 7471 Z Torque wrench DREMOMETER Z A+S with value locking and safety device (A+S), pre-set

• Technical advantage/Function:
• Pre-set value locking and safety device (A+S) eliminates the possibility of unintentional or manipulated adjustment, thereby representing more process reliability of the user
• Classified according to DIN EN ISO 6789-2:2017 Type II Class A, incl. traceable test certificate, calibrated to a maximum permissible deviation of +/- 3 % and thus more precise than the +/- 4 % required by the standard
• Lightweight yet robust (as the housing is made of an aluminium alloy) and resilient, very workshop-friendly
• Depending on the application, access is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket).
• Force to be applied in the middle of the handgrip only - do not use an extension tube as otherwise, inaccuracies can evolve (except for model DXZ where the DREMOMETER has been calibrated and adjusted using the extension tube)
• Operation only with end fittings with standardised depth gauges, otherwise inaccuracies can arise. Keep the depth gauges on the certificate in mind. Only use original Gedore accessories.
• Large drive cross-section transfers maximum torques
• Extremely low wear attributable to reduced forces in a lever mechanism
• Forged lever chain from our group own quality forge
• Maximum precision even when subjected to extreme continuous use
• Easy operation - fast and safe torque tightening
• Easy adjustment thanks to attractive adjusting button secured against loss at the end of the handle
• With certificate acc. to DIN EN ISO 6789-2:2017, traceable via in-house DAkkS laboratory to national standards
• Pre-set DREMOMETER for serial production wherever the same value always needs to be applied
• If ordering, please specify the N·m value - if a fixed factory pre-setting is desired (price on request)

Information

• Contents (Qty of pieces): 1 tlg.
• Drive size [mm]: 16 mm
• Torque range (min./max.): -
• Torque range (min./max.): -
• Total height [mm]: 30 mm
• Material: Aluminum alloy
• Head height 1 [mm]: 30 mm
• Width of head 1 [mm]: 35,0 mm
• Drive type/drive: Drive pin
• Torque wrench type: A+S
• REACH registration available: 0
• Storage/Content: Plastic box
• Trigger mechanism: Short path triggering
• Precision +/-: +/- 3 %
• Tightening direction: Left and right
• Fixed setting: 1
• Test certificate: DIN EN ISO 6789-2:2017
• Target groups: Automotive Industry Construction and commercial vehicles Military Mechanical engineering Railway Oil & Gas
• Range of application: Assembly Series assembly Production
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :
• :